The yacht aft section encloses the garage, capable of housing a tender.
The garage is accessible through the opening of an electro-hydraulic hatch (1).
The controls, which activate the hydraulic cylinders that raise and lower the garage hatch, are positioned on the access ladder to the stern cockpit, starboard side.
The garage hatch must always be closed during navigation.
Never start navigation with the garage hatch not correctly closed.
Loads inside the garage must be secured with the greatest care.
Leaking fuel can create a risk of fire and explosion. No combustible or other flammable material may be stowed in the garage.
Before closing the garage hatch, make sure that the jet-ski sledge has been completely closed and blocked with the relevant lock pins.
Garage hatch controls
The garage hatch operating controls are located on the access ladder to the stern cockpit, starboard side. The hatch opening and closing operations are to be carried out by holding down the respective button on the panel.
The movement is obtained thanks to an electro-hydraulic control unit (24V) (5) located in the engine room, which moves two hydraulic cylinders that raise and lower the garage hatch.
For further information on use and maintenance, please refer to the manufacturer’s manual.
Garage hatch moving system diagram
Garage ventilation system