Keep your yacht in conditions of the highest efficiency, carrying out all scheduled maintenance of the devices on board. A good maintenance will provide the best performance, a longer useful life and a constant respect of the safety requirements.
For the general cleaning of your yacht, only use bio-degradable or environmentally friendly products.
ENVIRONMENTDuring navigation, do not release any on-board waste at sea, but keep it and dump it in waste containers ashore.
Remember that it is forbidden to dump oils and fuels into the sea; therefore, it is recommended to clean the engines’ bilges by using absorbent materials to be disposed of later on into dedicated containers.
Before carrying out maintenance and adjustment operations on your yacht, activate all safety devices provided and evaluate if it is necessary to inform all persons on board. In particular, place warning signs in the nearby areas and prevent access to any device that, if operated, could cause unexpected hazardous conditions, thus endangering the persons and/or property on board.
Maintenance and adjustment operations must be carried out by authorized personnel who must use all necessary protections according to the procedures provided by the Manufacturer.
All maintenance operations requiring a precise technical knowledge or particular skills must be carried out exclusively by qualified personnel with recognised experience, acquired in the specific field of intervention.
To carry out maintenance in an area that is not easily accessible, or dangerous, take all of the necessary safety measures, according to rules and standards applicable to safety at work.
ENVIRONMENTAny maintenance operation must be carried out in the strict respect of the surrounding environment. Take all necessary measures to avoid that even one single “oil drop” may be spilled: the protection of our environment starts with this type of attention.
Access to the engine room during navigation must be limited to authorised personnel only, wearing appropriate personal protective equipment.
Inspect the sea water system inlets and outlets as well as the bilge systems.
These checks are vital to ensure yacht buoyancy.
Do not perform any maintenance operations or adjustments other than those indicated and/or suggested by the Manufacturer. If necessary, contact the Service Centre for more precise instructions.
Keep all yacht’s components clean by following the procedures and using the specific products suggested by the Manufacturer.
Use oils and greases recommended by Manufacturer. This will ensure yacht functionality and the expected safety level.