6.4.2 Operation of the toilet



The toilet of the bathrooms are of the “Saninautico” type ceramic, with related control panels on which there are two backlit buttons:

  1. Button “before use”;
  2. Button “after use”.

After 8 hours of service the backlit buttons switch off and the device sets to energy saving mode.

The pressure of one of the two buttons will restore the backlight.
The toilet will not discharge when the tank sensor indicates the full state.

To force unloading hold the button “after use” for more than 6 seconds.

To deactivate or reactivate the tank protection is necessary to press both buttons for two times in quick succession.

CAUTION

We suggest not to use the residential function of the toilet, as the water inside the toilet could splash out and wet the floor due to the yacht’s rolling.

CAUTION

Except for organic waste, only very thin toilet paper can be discharged into the sea toilets. Paper tissues or handkerchiefs and sanitary napkins may clog and damage the sanitary system.

CAUTION

Make sure that toilets are electrically powered and that the black water system is operating before using them.

WARNING

When the yacht is not operated for long periods of time, close the toilet overboard drain valve.

CAUTION

Forcing the toilet discharge can cause overfill of the tank.

CAUTION

The full tank condition is indicated by the red icon light.

CAUTION

The disabling of toilet drain protection can cause the tank to overfill.