5.12 WARPING WINCHES



Operation
On both sides of the yacht, at stern, inside the mooring locker, there is a warping winch (3).

For the operation it is necessary to fit the line into the barrel and to operate foot button.

The foot buttons (1) for each winch are located at the base of the relevant mooring locker and can be activated by pressing them with one foot:

Near the warping winches are fitted two mooring cleats (2).

For a safe anchor mooring, the lines used for warping have to be fastened to the proper cleats.

CAUTION

Do not approach your hands to the sliding area of the mooring rope.

DANGER

Before carrying out any maintenance operation on the anchor winch cut-off the electric power connected with it and remove with care the chain from the wildcat.

CAUTION

Do not activate electrically the winch with lever inserted into the drum.